Web rewinding and slitting machine
Key features:
1) Manual tension control for unwinding.
2) Automatic photoelectric and hydraulic deviation correction for unwinding.
3) Roll length control.
4) Pneumatic control pressure roller (SC100CA).
5) Speed control function of winding frequency conversion motor.
6) Pneumatic unwinding function (SC125CA).
7) Trimming function on both sides of the paper.
| Technical Parameters: |
| Coated paper gram weight |
70-120g |
| The maximum width of rewinding |
1092mm-2400mm |
| Maximum unwinding diameter |
φ1200mm |
| Maximum rewind diameter |
φ1100mm |
| Maximum working constant linear speed (when the drum diameter is φ300) |
300m/min |
| Maximum paper tension |
400N |
| Paper tightness |
Tight on the inside and slightly loose on the outside |
| The total power of the whole machine |
13. 25KW (main engine 11KW fan 1.5KW deviation correction 0.75KW) |
| The total weight of the whole machine is about |
3T |
We will design the best solution for you according to your requirements.
Zibo Quntuo Machinery Co., Ltd. is a key company specializing in the manufacture of paper coating machinery. The company has 5,000 square meters of standardized workshops, (welding, processing, assembly) factory layout is reasonable. It is well-equipped and has a number of sets of large-scale processing equipment.
The company has dozens of professional R&D, manufacturing, sales team, industry-leading coating machines, the company integrates the R&D and production of coatings and composite equipment, and its products are exported to (India, Bangladesh, Vietnam, Pakistan, Egypt, Thailand) and other countries. Its products are deeply trusted by customers at home and abroad.
The company's main products are thermal paper coating machine, containerboard coating machine, thermal transfer sublimation paper coating machine, NCR carbonless paper coating machine, coated paper coating machine, glass cardboard coating machine, photo paper coating machine, etc. (providing supporting paper processing, slitting, rewinding and other equipment). ...
Equipment introduction:
Structural configuration
1. a unwinding mechanism
1) Unwinding FZ400A-1 magnetic powder brake 1.
2) Automatic photoelectro-hydraulic deviation correction.
3) A pair of 40mm thick unwinding frame wall panels.
4) 2 wallboard support pipes.
5) Two φ90 hard alumina guide rollers.
6) 1 unwinding transmission bearing.
7) 1 inflatable shaft for unwinding.
8) 4 sets of frame moving linear guide rails (rail length 340mm).
9), 1 pair of inflatable shaft positioning bearings.
2. a winding mechanism
1) A pair of 40mm thick winding frame wall panels.
2) A pair of 30mm thick floating wall panels (the pressing force of the paper surface is adjustable).
3) 1 3-inch winding inflatable shaft
4) 11KW4 pole winding AC inverter motor.
5) 1 group of belt transmission mechanism.
6) 1 set of winding shaft transmission bearing.
7) 1 set of winding control frequency conversion controller.
8) 6 D90 aluminum oxidation transition rollers.
9) A set of pneumatic control mechanism for surface compression.
10) A set of paper edge tightening adjustment mechanism.
11) Photoelectric sensor manual adjustment mechanism.
12) a lower knife shaft.
13) Three round knives up and down.
14) A set of pneumatic control winding and unloading mechanism.
15) A set of waste edge elimination fan (1.5Kw) air duct.
16) 1 side guard.
Appliance configuration
1), 11kw inverter (Shanghai Yatai).
2) Electrical components (CHINT).
3) Pneumatic components (Yadek, Japan SMC)
4) Electrical control box (main power supply, fan power supply, emergency stop switch, automatic deviation correction control, host frequency conversion speed control, manual tension control, tension display, automatic meter counter function keyboard, pressure roller pneumatic control, unwinding pneumatic control).
Price: 78000.00 yuan/set (excluding tax)
Loading method: bulk reinforcement, parts we pack in wooden boxes (fumigated wood packaging)
Negotiation and acceptance
If you need more comprehensive and detailed information about our company, please contact us.
Q1:Where is your factory located? How do I get there?
A: Our factory is located in Zibo City, Shandong Province, China. The nearest air port is Jinan Airport, we can go to Jinan Airport to pick you up.
Q2:Does your company provide foreign machine installation services?
A: We have a strong service team, which can provide all the machines purchased from our company foreign installation service and engineer training service. But buyers need to provide tickets, food, hotel expenses, etc.
Q3:How does your company provide after-sales service?
A: All machines purchased from our company have a warranty of one year (unless any human error occurs), lifetime maintenance, 24-hour hotline.
Q4: What is the payment method?
A: We accept T/T, L/C, Western Union, Moneygram ETC
){kind=link}